New Member from New Hampshire

[Raven]

Hello, I’m from New Hampshire, I have 3 Panheads 2-‘62’s and a ‘59. None of them are restored. All three have been through the chrome it all, put acorns everywhere, cut this off to put that on, but all three run. Two have S&S Shorty’s and one ‘62 has a Bendix.
I am slowly collecting some of the correct fasteners, parts and tin to get them closer to correct.
I’m very happy to become part of this Forum, so I can learn more about my rigs.

Thank you
Raven

[Rubone]

Welcome Raven, Panheads are fun. Good luck on your endeavor, lots of COB repairs and dumb **** on old Pans.....

[surfdude]

Raven - welcome to the forum. I am the membership chair for the Yankee Chapter, covering NH, VT, ME, MA CT and RI. The Yankee chapter has approximately 300 members, 40 in NH - please join us! You can do so here:

http://www.yankeechapter.org/membership.shtml

surfdude

[craig (DE)]

Welcome Raven! I am a relatively new Pan owner (~3 years) and learn something almost daily from this site and the very knowledgeable members.
I'm sure you will also find helpful information about these classic bikes.

[Raven]

Thank you Craig,

[Raven]

41

Raven - welcome to the forum. I am the membership chair for the Yankee Chapter, covering NH, VT, ME, MA CT and RI. The Yankee chapter has approximately 300 members, 40 in NH - please join us! You can do so here:

http://www.yankeechapter.org/membership.shtml

surfdude

Make that 41 in NH

[Raven]

Welcome Raven, Panheads are fun. Good luck on your endeavor, lots of COB repairs and dumb **** on old Pans.....

Thank you Rubone

[ragsflh]

welcome aboard