Tweet
1947 Knucklehead
Hi, new to the forum but not to old bikes. Restoring a late 1947 straight leg Knuckle and I am attempting to use the correct tool box mounting bracket 47386-41 does it take the three hole bracket or two hole is it mounted with bolts or welded? I would prefer someone who has and original late 47. Thanks oldblu.
-
Last edited by oldblu; 12-08-2018, 10:12 AM. -
Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/ -
Chris: I have had Palmer's for many moon's and i have seen original 47's with the tool mount up high and low just attempting to find out what is the majority. Much thanks. oldblu.Comment
-
oldblu,
Mine is mounted low because of the Loctite bags, which I'm told is correct.Comment
-
55tmm: thanks for the very informative information, i will be putting loctite bags on mine as well, does yours have a two hole or three hole horizontal bracket and is it welded on or bolted on and hoping you have a late xe-12 frame. this would be most helpful. Thanks again oldblu.Comment
-
oldblu,
The horizontal bracket on mine has 2 holes and is bolted on low, original paint and shows no sign that it was ever mounted to the upper position which has 3 holes in the vertical bracket. My vin is 5_ _ _ _ with early seat and bags, frame has 11 on it.Comment
Comment