throttle block height mismatch

[Omarttentmaker]

This is in response to the guy who posted the question about the height mismatch between the throttle cable and the throttle block. I read the post this morning, but when I went back to respond the post had disappeared. I've contacted a site admin about the problem, but in the meantime I thought I'd show this. The pic shows several different throttle lever arms used in different years for different models. I believe the one you want is one of the three that are second from the left in the pic. Note that the tops are all different, and i don't know which one is completely correct for your application. carb linkage risers.jpg

[C.Flint]

Perfect, thanks for sharing.

[T. Cotten]

What about all the rest, Omar?

20 4012 lvr.jpg

DL10LVR.jpg

DL12LEVR.jpg

DL54LVR.jpg

DL75LVER.jpg

.....Cotten

[T. Cotten]

Wait! There's more,...

Indian throttle lever.jpg

ODDLEVER.jpg

SHBLVRSX.jpg

And probably many I didn't record.. And there were at least four different cable blocks.

.....Cotten