1928 Prince Cylinder Head

[bmason]

Still looking for a cylinder head for a '28 Prince. 6 mounting holes like the 37" Scouts but, with an angled spark plug hole. I believe it will have the # 16 cast on the right side perimeter. Any help or info is greatly appreciated. Thanks

[PaulCDF]

"Still looking for a cylinder head for a '28 Prince"

BMason

Welcome, Not sure where you are located

If you have not already done so, consider checking with:

In the States:

Randy &Lorrie Zorn indianmotocycleparts.com

Robin Markey at Bob's Indian in Etters PA.
www.bobsindiansales.com

ziggysmotorworks
sandgap ky

Down Under

indianengineeringaustralia.com.au

Mark Barthelmie of Australia crazyhorsemoto.com.au

Good Luck
Any pictures of that Prince?

[bmason]

Thanks Paul, I have contacted several of those folks but not Randy Zorn. Will give him a try.
I can send you pic's of a complete '28 Prince that I have. It's a bit of a Frankenstein as far as year correct-ness. I have a '28 project bike that is in pieces and is the one I need the head for. Also have a'26 that is a project bike as well.

[PaulCDF]

I am working on a 741 that is still more of a 'parts pile' and will definitely be a bitsa/Frankenstein when done. Good Luck

Here is link to my "build" on this forum:

741 'Bitsa' - AMCA Forum