1935 vl forks

[Johnrg]

Need correct 1935 vl forks, have earlier 30's forks in good condition to trade.

Thanks, John

[Johnrg]

IMG_20140401_161219.jpgIMG_20140401_161235.jpgIMG_20140401_161316.jpgIMG_20140401_161341.jpg

[don]

Are these early 30 forks? It looks like they have angled grease fittings. What size are the rocker bolt holes?

[Joseph.Greiner]

From what I understand from reading Steve Slocombe's book these are early 1930 forks with the 3 piece threaded in spring rod bushings. It had straight zerk fittings in the fork when we got it. The holes for the grease fittings are off to the side and covered by the single headlight bracket when assembled, if that is what you mean. I will reply later with the measurements of the rocker bolt holes and some close up pictures when I get down to work.

Here is what they looked like mocked up on the bike.
IMG_20140109_140554.jpg

Here are some pictures and measurements, right side leg:
Right Hole.jpgRight Measure.jpg

Left side leg, needs repair:
Left Hole.jpgLeft Measure.jpg

I hope that helps.
-Joe