Announcement

Collapse
No announcement yet.

1935 vl forks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1935 vl forks

    Need correct 1935 vl forks, have earlier 30's forks in good condition to trade.

    Thanks, John

  • #2
    IMG_20140401_161219.jpgIMG_20140401_161235.jpgIMG_20140401_161316.jpgIMG_20140401_161341.jpg

    Comment


    • #3
      Are these early 30 forks? It looks like they have angled grease fittings. What size are the rocker bolt holes?

      Comment


      • #4
        From what I understand from reading Steve Slocombe's book these are early 1930 forks with the 3 piece threaded in spring rod bushings. It had straight zerk fittings in the fork when we got it. The holes for the grease fittings are off to the side and covered by the single headlight bracket when assembled, if that is what you mean. I will reply later with the measurements of the rocker bolt holes and some close up pictures when I get down to work.

        Here is what they looked like mocked up on the bike.
        IMG_20140109_140554.jpg

        Here are some pictures and measurements, right side leg:
        Right Hole.jpgRight Measure.jpg

        Left side leg, needs repair:
        Left Hole.jpgLeft Measure.jpg

        I hope that helps.
        -Joe
        Last edited by Joseph.Greiner; 04-03-2014, 09:28 PM.

        Comment

        Working...
        X