Knucklehead E OEM Steel Pushrods

[ricmoran]

Wanted to buy a good usable set of model E steel OEM pushrods. These are for use in a 1939 E knucklehead.

The pushrods would be of differing lengths where 2 would be of equal length for front and rear intake and the remaining 2 would be longer.

The remaining 2 as I understand it would be slightly differing lengths, longer than the intake pushrods and the extra length for the the rear and front exhaust.

Thanks for any help that can be provided!

[Rubone]

ricmoran,
All knucklehead pushrods are the same length, front, rear, 61, 74, early, or late.The style changed but not the length. The camm followers are different lengths for intake or exhaust, not the pushrods. All Knuckle pushrods are also the same part number, early or late style.
Robbie

[ricmoran]

Robbie,

There was a set that was on ebay where the lengths were different and I've been adivsed by a couple old timers that these do exsist.

Had to search for a message sent by the seller for the pushrods...

They came out of an FL. 1 is 7 3/4", 2 are 8" and 1 is 8 1/4".
Here is th eebay ad for them:

http://cgi.ebay.com/ebaymotors/ws/eB...TQ:MOTORS:1123

Had a brain fart and forgot to put a bid in on these, apologize seller stated these were for FL model.

[Chris Haynes]

Jed's Cycle Products has them.
http://jedscycleproducts.com/products.php

[ricmoran]

Thanks again Chris.