Results 1 to 8 of 8

Thread: Police side stand

  1. #1
    Join Date
    Apr 2008
    Location
    New York
    Posts
    9

    Default Police side stand

    Looking for a police side stand in serviceable condition for my 64. Please donít beat me up on the $.
    Mike

  2. #2
    Join Date
    Mar 2017
    Posts
    518

    Default

    Quote Originally Posted by steuerm View Post
    Looking for a police side stand in serviceable condition for my 64. Please don’t beat me up on the $.
    Mike
    What is the difference between a police stand and a regular jiffy stand?

  3. #3
    Join Date
    Jan 2006
    Location
    Menomonie, WI
    Posts
    1,372

    Default

    Is the police jiffy stand the one that is curved outward?

    Jerry

    Quote Originally Posted by steuerm View Post
    Looking for a police side stand in serviceable condition for my 64. Please don’t beat me up on the $.
    Mike

  4. #4
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,828

    Default

    Quote Originally Posted by Jerry Wieland View Post
    Is the police jiffy stand the one that is curved outward?

    Jerry
    I think it was just about the "pads", Jerry!

    My '65 book lists:
    50061-36A for '48-'64 civvies,
    50061-36B for '65- civvies,
    50061-52 (without pad)(used with rear siren)
    50062-40 for '41-'64 (with pad)(police)
    50062-40A for '65- (with pad)(police)

    That's all I know.

    ....Cotten
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  5. #5
    Join Date
    Jun 2019
    Location
    Texas
    Posts
    156

    Default

    In case it's helpful, someone previously posted below image. Believe it's from Palmer, but don't know what edition. I think differences include pad and curve (for siren) and maybe tip, as applicable.

    Fletcher Clark Johnston
    AMCA #282

  6. #6
    Join Date
    Apr 2008
    Location
    New York
    Posts
    9

    Default Police side stand

    Glad to see the discussion. My limited knowledge on the stand is the addition of the pad as Cotton says and yes I am running the siren. As to the bend I canít give any good dimensions. I donít have one.. yet.

  7. #7
    Join Date
    Apr 2008
    Location
    New York
    Posts
    9

    Default

    Now that I have installed the correct side stand I thought some clarification would be helpful. The image (B) is deceiving. The curve of the side stand is obvious when the stand is stowed. In no way does it clear the siren. What it does do is tuck up against the Sirens foot pedal to frame bracket. Which is just below the outer primary inspection cover. I hope my explanation is clear.

  8. #8
    Join Date
    Jul 2002
    Location
    North Hills, CA and Pine Grove, CA
    Posts
    5,584

    Default

    There are two different police jiffy stands. One for with a siren and another for without. The one for with siren makes a 90 degree turn outboard on the last few inches of the stand.
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •