Results 1 to 2 of 2

Thread: 1912 Harley Single Project

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default 1912 Harley Single Project

    Iím in need of a few bits for a 1912 Harley single Iím working on.
    For the engine I need the complete intake valve housing. The screw in valve housing, valve, valve cap, etc. I believe that this is the same as on a 1910 and 1911.
    I also need the decompression lever on the outside of the motor.
    I could also use either a complete motor pulley or at least the outer plate.
    For the chassis, I need the pedal crank and crank sprocket and (long shot here) front and rear fenders.
    Any help would be greatly appreciated.
    Mark Masa

  2. #2
    Join Date
    Jan 2019


    Mark send us a few pix, i for one would luv to see your progress, biker buddy...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts