Results 1 to 7 of 7

Thread: Atlas Conversion Shift Gate

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2010
    Posts
    281

    Default Atlas Conversion Shift Gate

    I bought these at a now defunct shop in St. Louis about 25 years ago. I can't find the part that attached to the transmission lid.CIMG1436.jpgCIMG1435.jpg
    Craigimage0-002.jpg

  2. #2
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,825

    Default

    I think Robbie Rubone corrected me on this one, Craig!

    Or at least I didn't know what it was when I asked...

    ....Cotten
    Attached Images Attached Images
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  3. #3
    Join Date
    Dec 2001
    Posts
    529

    Default

    When I first put up my '40 EL I ran the early Superior twin duals down both sides in the rear (left side goes behind rear cylinder) and the shift rod runs smack into the middle of the pipe. So this shift gate and triangle piece on the transmission eliminate that issue. The one on cotton's photo on the transmission someone made. They were originally a smaller triangle ( not so tall). They flipped the dog in 1947 ( the factory) so you go run duals and because riders like to throw 4th away from their body. I prefer shifting to high towards me. The adapter shift gate fit the early tanks (pre-'47) with the '47 shift pattern and adapter made the dog reversed. Cool idea. We always called them the Mystery gate. I've seen many early gate cut and welded to later cut gates to do the same thing.
    DrSprocket

  4. #4
    Join Date
    Nov 2010
    Posts
    281

    Default

    RichO; The transmission adapter on Cotten's picture looks pretty close to the one in the catalog. Could be my old eyeballs though.
    Craig

  5. #5
    Join Date
    Dec 2014
    Posts
    106

    Default

    I never understood the need, I am 6'1" and my knee as very far away from the shifter on my 45 when in 3rd. But the advertisement talks about when riding two up, which I have never done. I guess when you fit up a buddy seat and bring your gal, you find yourself up on the gas tanks. Can't help you but I appreciate the information.

  6. #6
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,825

    Default

    I don't get it either, William!

    But the rounded construction probably is safer than the MOCO 'knee-slicer'.

    Riding two-up usually makes the footclutch action awkward.
    That's just another reason why I always completely released the dampener so it would engage itself like an auto.

    (And of course, always found neutral long before I rolled to a stop.)

    ....Cotten
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •