recommendations on who to have rebuild my 53 motor and tranny ???

[PanH]

Here's my story ---- I bought my panhead in 1970.. Sometime around 1990 I had another bike and started riding that more, so the panhead was relagated...

[downunder vl]

Hi all,

I am having the Schebler DLX 13 Nickel plated for my Series 19 Excelsior and want to be sure that I plate all the parts to make the...

[Mdesoucey]

Still working on re-wire of my 1966 servi . Can anyone share what was used to secure the harness/ wires to the frame? Some kind of clamps, wire ties,...

[diablo]

Look familiar to anyone or is it off of a model A. Remote lever attached to valve?????...

[otis71]

On the fusible wire 70105-73 that runs from the positive terminal on the battery to the starter relay on mid 70s FLHs, what did the factory use to connect...

[DANPATCH]

I just pick up a NOS lend part #5054-20 Looks correct but does not have any numbers or letters like the book says.The one that came with taillight also...

[cscott]

looking for 1930-31 indian chief aluminum gas tanks and fittings, thanks

[chuckthebeatertruck]

This is a caveat for those who are occasional sellers of parts on ebay or that haven't sold something in the past couple of years on ebay.

...

[downunder vl]

Hi all,

I'm having some trouble with the mechanism of the kick start on my Series 19 Excelsior. It is not disengaging cleanly. Below are...

[grease monkey]

The good stuff ! RARE , POLICE SPEC 12 VOLT ELECTRICS FROM NEW ! Also rare is the like new "Avonaire" full fairing and the factory BMW tachometer....

[T. Cotten]

As some of you know, Folks,

We lost Moen of VirtualIndian recently, so the domain was snatched up by a sketchy platform, thus now twenty-plus...

[DANPATCH]

Bought 18" Firestone tires from Coker .I can not get the raised edge close to rim to be even all the way around the rim.I thnk the raised bead maybe...

[cwilli]

What 12volt agm battery are you using that fits in Kiwi's battery box for 1948 Chief?

Thanks...

[34VDharley]

So this weekend I took my bike on a 40 mile ride up to Scottsdale for a bike show. Bike made it there but started getting cranky before I pulled up....

[sw48]

Does anyone know of a vendor who can supply these clips measuring .025 inches thick. I have NOS ones from a military surplus box that measure .04 inches...