Question about fittment of hollow axles:
Per manual
"3. Replace bearings, tapered end toward the hub.
4. Slide the hollow axle through."
However I find my hollow axles will not 'slide' through.
Do hollow axles need to be pressed through the bearings?
Do hollow axles need to be turned down for a 'slide through' fit?
Thank You.
Per manual
"3. Replace bearings, tapered end toward the hub.
4. Slide the hollow axle through."
However I find my hollow axles will not 'slide' through.
Do hollow axles need to be pressed through the bearings?
Do hollow axles need to be turned down for a 'slide through' fit?
Thank You.
Comment