Announcement

Collapse
No announcement yet.

Indian Scout Parts?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Indian Scout Parts?

    Hello all,
    I found these cylinders, pistons and rods last weekend and wanted to post to see if anyone knew the numbers embossed on the bases. I measured the cylinders at 2.994" (with rusty sleeves). The numbers appear to be 93051 & 93053. Any ideas?
    Thanks, William #10035
    Attached Files
    William Edwards, AMCA #10035

    Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
    http://www.amcasouthernnationalmeet.com/

  • #2
    Originally posted by wideglide38 View Post
    Hello all,
    I found these cylinders, pistons and rods last weekend and wanted to post to see if anyone knew the numbers embossed on the bases. I measured the cylinders at 2.994" (with rusty sleeves). The numbers appear to be 93051 & 93053. Any ideas?
    Thanks, William #10035
    Sure look like 40's. But the 2.99 bore bothers me. That isn't the o.d. of the "sleeve" protruding below the base, is it?

    Comment


    • #3
      I rechecked and they measured (at the top of the cylinder) 2.878 and 2.900. They are heavy with rust which can skew the measurement.
      William Edwards, AMCA #10035

      Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
      http://www.amcasouthernnationalmeet.com/

      Comment

      Working...
      X