Tweet
Hi everyone, i recently picked up a 1917 Indian little twin project and need a few parts and was wondering if anyone out there has some parts hanging around? I would prefer using original parts over reproduction as it has almost no reproduction parts on it.
I am looking for:
1. The front intake dome
2. Intake pushrods
3. exhaust push rods
4. A set of handle bars
5. A 36 spoke corbin front hub
6. 42 degree dixie magneto
7. magneto drive gear
8. engine sprocket
9. rear wheel sprocket
10. transmission sprocket
11. All linkages for the shifter, brake and clutch
12. brake pedal
13. clutch engagement arm that is operated by hand next to the shifter
14. cross over shaft for clutch pedal and arm
15. Header exhaust pipes
16. muffler chamber
17. front fender bottom stays and top mount to spring
18. seat frame
19. rear stand
Thanks for your help,
James
I am looking for:
1. The front intake dome
2. Intake pushrods
3. exhaust push rods
4. A set of handle bars
5. A 36 spoke corbin front hub
6. 42 degree dixie magneto
7. magneto drive gear
8. engine sprocket
9. rear wheel sprocket
10. transmission sprocket
11. All linkages for the shifter, brake and clutch
12. brake pedal
13. clutch engagement arm that is operated by hand next to the shifter
14. cross over shaft for clutch pedal and arm
15. Header exhaust pipes
16. muffler chamber
17. front fender bottom stays and top mount to spring
18. seat frame
19. rear stand
Thanks for your help,
James