Anyone know the valve clearance specs on a 1941 Four? I believe the exhaust is .006 on cyl 1&2 and .008 on cyl 3&4, but I have no idea on the intakes? If the exhaust is correct, then I assume the intakes would be around .004 1&2 and .006 on 3&4. Any input would be great?
Announcement
Collapse
No announcement yet.
41 Four Valve Clearances
Collapse
X
-
Indian Four Valve Settings
I set my 440 exhaust at .006 for 1&2 and .008 for 3&4. All intakes are set at .002 per the book. Some old mechanics will add a thousandth for good measure. No problems ever at these settings.
Steve Klein
AMCA Member 12176
steve@steveklein.com
TexasSteve Klein
Collector . Conservator . Enthusiast
American Pre-teens - 1965
AMCA Member 12176
Cherokee Chapter President, Editor
www.CherokeeAMCA.org
Steve@SteveKlein.com
Georgetown, TX USA
Comment
Comment