So I guess there are 4 springs on the pogo seat. One for the upper seat post and 3 for the lower internal post. It appears that there is a nut at the bottom of the post underneath the frame. My assumption is that this nut comes off, allowing the post to come up and out after which I can replace the springs. Please correct me if I'm wrong and if there's any tips or tricks I should know about, please let me know as well. Thanks.
NOTICE: New member email requirements now in effect. Longtime member having trouble logging in? Please review the requirements here.
Only registered users may post new messages on this forum. You must be an AMCA member to register. Click the register link on the top right to proceed.
If this is your first visit, be sure to check out the FAQ by clicking the link above. To start viewing messages, select the forum that you want to visit from the selection below.
If you are NOT an AMCA Member and would like to join Click Here
Comment