Tach cable core and casing needed

[Chris Haynes]

I am looking for a 92064-62 Tach cable core and casing. There were used on the 1962-1969 magneto equipped XLCH models.
TIA,
Chris

[Robert Luland]

Chris the cable is only good to 64. The 65 cable was longer. You only need the outer housing. The last thing you want to do is run that Rub Goldberg set up unless you want to rebuild your mag on a regular bases. Look on NOS parts. The main problem here is as Harley moved on they made the cable housing vinyl coated where the orignal was bare cad plated. The orignal on my 65 was bare but kinked beyond repair. Looking for this stuff as separat part numbers is much more productive. Bob

[Chris Haynes]

Bob,
You are correct. I need the 92065-65.

[Robert Luland]

Chris is there anything that would keep ya from striping off the vinyl covering and cad plating the outer sleeve? Bob

[Chris Haynes]

Chris is there anything that would keep ya from striping off the vinyl covering and cad plating the outer sleeve? Bob

From what?

[Robert Luland]

The outer tack or speedo cable.

[Chris Haynes]

I don't have a cable. I need one. I bought the repop that V-Twin sells and it will not screw on to my 1965 tach.

[Robert Luland]

Does this suprise you?

[Chris Haynes]

Robert,
You are being your helpful self, as usual.