Tweet
Does anyone hace a picture of the carburator outer control cable, clamped to the bracket at the manifold. I have the correct bracket (27448-57) and purchased the cable clamp from Old Dude (9965). But things don't seem to line up correctly.
Also, after several years of searching, I found the correct horn about year or so ago in excellent condition. But it didn't have the bracket. Yesterday I found a couple (2) pieces that look like the correct brackets. If I remember correctly, that bracket was comprised of two or three straight pieces of thin steel stock that were punched on both ends for the horn and the motor mount bracket. Can anyone give me the details of the horn bracket including the number of plys and maybe a picture of the top of the bracket where it bolts to the top motor mount cross-piece?
Thanks,
Bill Pedalino
Also, after several years of searching, I found the correct horn about year or so ago in excellent condition. But it didn't have the bracket. Yesterday I found a couple (2) pieces that look like the correct brackets. If I remember correctly, that bracket was comprised of two or three straight pieces of thin steel stock that were punched on both ends for the horn and the motor mount bracket. Can anyone give me the details of the horn bracket including the number of plys and maybe a picture of the top of the bracket where it bolts to the top motor mount cross-piece?
Thanks,
Bill Pedalino