Here’s a 48 wishbone frame. No horn mounts or flat spots. It’s the real deal. This belongs to the gentleman Bruce Jeric that had his stand across from me at Jefferson. Check out the tool box bracket. It appears to be factory. Pretty cool. Not like the ones I have. Could this be one of those factory custom police frames? Think hard boys. Bruce is depending on ya. Bob L
Announcement
Collapse
No announcement yet.
Wierd 48 Frame.
Collapse
X
-
Tags: None
-
Obviously the tool box bracket has been replaced with a Knuck bracket. Notice that the welds have been ground. Not something the MoCo did.
Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/
Comment
-
The Police, actually California Highway Patrol, frames have the toolbox bracket on the clutch side of the motorcycle. This was because the CHP used Hedburg sirens which mounted on the kicker side of the bike.
Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/
Comment
Comment