Unknown Plumber Intake Manifold

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • 41craig
    replied
    Originally posted by 41craig View Post
    I bought these at E&M in St. Louis in the mid 1980's. Ed Miller and his brother ran this motorcycle shop in the '60's through 1985. Ed also started Midwest Motorcycle Supply in the 1970's. He and his brother bought out a lot of Midwest Harley dealers, in the '60's, that were going out of business. He had tons of NOS and good used Harley and Indian parts and bikes too. I have to think that these manifolds are 1950's manufacture. I could be wrong, but that is why I'm asking for any info on them. Ed retired and sold out in 1985, but the new owner only wanted the new parts business. He had an auction in 1985 and I bought a fair amount, but he still had 5 barns full of bikes and parts. He sold the remaining bikes and parts in 1991. I have a lot of pics from that auction, but I don't know where on the forum would be a good place to share them. Here is a couple of them.
    Craig[ATTACH=CONFIG]26486[/ATTACH][ATTACH=CONFIG]26487[/ATTACH][ATTACH=CONFIG]26488[/ATTACH]
    I shared all of the pictures on the Harley-Davidson Other Discussion on the forum.
    Craig

    Leave a comment:


  • T. Cotten
    replied
    Originally posted by govmule84 View Post
    You misspelled PEEK.
    PEEK ain't History yet, Gov!

    Brasses are.
    And I wonder how you would ever get brasses soft enough if they are that loose..

    Just how 'annealed' are NOS OEM brasses, Folks?
    And how tight on an NOS spigot?
    I've never held or smelled any, but the vast majority of veterans that are crimped enough to damage the spigots suggest they had to start out pretty sweet.

    Thanks again...

    ....Cotten
    PS: Asking not how they were annealed, but how 'mushy', versus 'springy',.. are they?
    Perhaps they were not tempered at all.

    We might have to go back someday.
    Last edited by T. Cotten; 11-20-2019, 10:34 AM.

    Leave a comment:


  • govmule84
    replied
    You misspelled PEEK.

    Leave a comment:


  • T. Cotten
    replied
    This brings up another question for the Ages, Folks!

    Should the brasses be soft and mushy?
    Or springy so they compress at the bevel as well as against the inlet nipple?

    Thanks as always,..

    ....Cotten

    Leave a comment:


  • 41craig
    replied
    Originally posted by T. Cotten View Post
    I forgot about the "script" Colony manifolds, Craig!

    Again, thanks for the documentation.

    ...Cotten
    PS: Seals look loose, huh.
    Yes the seals move easily through the packaging.
    Craig

    Leave a comment:


  • T. Cotten
    replied
    I forgot about the "script" Colony manifolds, Craig!

    Again, thanks for the documentation.

    ...Cotten
    PS: Seals look loose, huh.

    Leave a comment:


  • 41craig
    replied
    Originally posted by Chris Haynes View Post
    Colony used to sell a wide cast iron intake. I don't know if this is one of theirs or not.
    Chris; Here are some pics of Colony vs. Harley intakes.CIMG1545.JPGCIMG1560.JPGCIMG1558.JPG
    Craig

    Leave a comment:


  • T. Cotten
    replied
    Originally posted by D.A.Bagin View Post
    You can share them right here. LOL.
    A new topic makes most sense, Craig!

    If you uploaded the three pics directly to the forum, they will be a simple 'drag and drop' from "Manage Attachments" to the new topic without uploading them again.

    (The attachment 'hoops' are confusing at first, but quite worth it if you post often to different threads.
    The search function doesn't help at all. Maybe its my WIN7?)

    ....Cotten

    Leave a comment:


  • D.A.Bagin
    replied
    You can share them right here. LOL.

    Leave a comment:


  • 41craig
    replied
    I bought these at E&M in St. Louis in the mid 1980's. Ed Miller and his brother ran this motorcycle shop in the '60's through 1985. Ed also started Midwest Motorcycle Supply in the 1970's. He and his brother bought out a lot of Midwest Harley dealers, in the '60's, that were going out of business. He had tons of NOS and good used Harley and Indian parts and bikes too. I have to think that these manifolds are 1950's manufacture. I could be wrong, but that is why I'm asking for any info on them. Ed retired and sold out in 1985, but the new owner only wanted the new parts business. He had an auction in 1985 and I bought a fair amount, but he still had 5 barns full of bikes and parts. He sold the remaining bikes and parts in 1991. I have a lot of pics from that auction, but I don't know where on the forum would be a good place to share them. Here is a couple of them.
    Craigimage0-010.jpgimage0-018.jpgimage0.jpg

    Leave a comment:


  • T. Cotten
    replied
    Originally posted by Jerry Wieland View Post
    It is not the same as the old Colony intakes that I am familiar with. They were more OEM looking. Jerry
    Just the 428 401 was much too crisp, and the cad was modern bright stuff, Folks..

    (Cad does darken with time, but the lack of texture on the casting made it even whiter. Some of Colony's were almost iridescent.
    Their parked one were pretty decent too, although more green than grey.)

    A quality cast and machined manifold isn't easy, and I suspect Colony gave up and dumped all their seconds on Tedd.

    What founder's hallmark is a Circle L?
    (Thanks in advance..)

    ....Cotten
    Last edited by T. Cotten; 11-18-2019, 02:46 PM.

    Leave a comment:


  • Jerry Wieland
    replied
    It is not the same as the old Colony intakes that I am familiar with. They were more OEM looking. Jerry

    Originally posted by Chris Haynes View Post
    Colony used to sell a wide cast iron intake. I don't know if this is one of theirs or not.

    Leave a comment:


  • govmule84
    replied
    I have a home-made version of that thingy.

    Mine was made for small-port heads installed on an FL. In addition to accommodating the later carb, it also took up the greater spread between the ports.

    So maybe it's not for strokers, per se, but those looking to adapt heads. I have been given to understand that small port heads on the bigger motor was desirable due to the greater port velocity, and this is the first time I've ever seen a commercial solution to this problem.

    Leave a comment:


  • Chris Haynes
    replied
    Colony used to sell a wide cast iron intake. I don't know if this is one of theirs or not.

    Leave a comment:


  • T. Cotten
    replied
    That popped the balloon, Craig!

    If it was 'small port', it might have been pretty desirable.

    But the grossly oversized bore just means fuel can 'puddle' in it from the pressure drop.

    If a four-bolt Linkert was bored out that big, the idle bleeds would just be one big hole.

    ...Cotten
    Last edited by T. Cotten; 11-18-2019, 12:39 PM.

    Leave a comment:

Working...