Unknown Plumber Intake Manifold

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • 41craig
    replied
    Originally posted by Jerry Wieland View Post
    What is the diameter of the spigot?
    Jerry; The spigot to the head is the same as the 74 manifold. The spigot to the carb is larger than the 74 manifold. Approx. 1.620 vs. approx. 1.565.
    CraigCIMG1544.JPGCIMG1541.JPGCIMG1542.JPGCIMG1543.JPG

    Leave a comment:


  • Jerry Wieland
    replied
    What is the diameter of the spigot?

    Leave a comment:


  • 41craig
    replied
    Cotten; It is 4" end to end. This is why I thought it was for a stroker.
    Craig

    P.S. Sorry for the crappy pics.
    Last edited by 41craig; 11-17-2019, 04:01 PM. Reason: Later thoughts

    Leave a comment:


  • T. Cotten
    replied
    Was Jerry right, Craig?

    Its a small port?

    (I tried to juggle the tape measure with my photoeditor, but its got double-vision.)

    Cotten
    PS: Typos on the instruction tab says somebody tediously cranked each one out on a Remington, maybe.
    My ribbon's too dry to try to compare.
    Last edited by T. Cotten; 11-17-2019, 03:20 PM.

    Leave a comment:


  • 41craig
    replied
    Cotten; I dig these oddballs out every now and then to possibly expand our knowledge.
    Craig

    Leave a comment:


  • T. Cotten
    replied
    I have no clue, Craig!

    But many thanks for posting the pics for posterity.

    (and my library...)

    ...Cotten

    Leave a comment:


  • 41craig
    replied
    Jerry; When I bought this one, I figured it was for a stroker. Cut to fit.
    Craig

    Leave a comment:


  • Jerry Wieland
    replied
    It almost looks like it was made to fit a 1940 and up Harley 4 bolt 1 1/2" carburetor to 1939 and down heads which normally had a 3 bolt 1 1/4" carburetor. Neat.

    Jerry


    Originally posted by 41craig View Post
    I just want to know if anyone out there is familiar with this aftermarket Knucklehead - Panhead manifold. I have 2 of them. One of them had instructions placed inside. I have not seen any old ads for them.[ATTACH=CONFIG]26453[/ATTACH][ATTACH=CONFIG]26454[/ATTACH][ATTACH=CONFIG]26455[/ATTACH][ATTACH=CONFIG]26456[/ATTACH][ATTACH=CONFIG]26457[/ATTACH]
    Craig

    Leave a comment:


  • 41craig
    started a topic Unknown Plumber Intake Manifold

    Unknown Plumber Intake Manifold

    I just want to know if anyone out there is familiar with this aftermarket Knucklehead - Panhead manifold. I have 2 of them. One of them had instructions placed inside. I have not seen any old ads for them.CIMG1534.JPGimage0.jpgCIMG1536.JPGCIMG1538.JPGCIMG1540.JPG
    Craig
Working...