Shop local to SE Pennsylvania

[Steve Galli]

Hi all,
Any recommendations on a shop to do an overall lowercase rebuild on my 58 FL?
There don’t seem to be a whole lot of options...
Saw a couple shops... one in South Dakota and one in New York State...
Have no idea how much this is going to cost me...
thank you!

[jim d]

Al's Motorcycle Repair Shop Lancaster Pa 717 291 4500

[Steve Galli]

Al's Motorcycle Repair Shop Lancaster Pa 717 291 4500

Very Close to me... Thanks!

[craig (DE)]

Reading Cycle
610-371-2025

I have no personal experience but hear some Perkiomen Chapter guys say they are very good!

[Steve Galli]

Reading Cycle
610-371-2025

I have no personal experience but hear some Perkiomen Chapter guys say they are very good!

Thanks Craig, Just messaged this shop and he says only Evos and newer bikes worked on...

[Guest]

Try Bill’s custom cycles in Bloomsburg, Pa

[craig (DE)]

Thanks Craig, Just messaged this shop and he says only Evos and newer bikes worked on...

Wow! I knew one member who had an old Shovel worked on at that shop.

Check with Bikeworks (215-885-3633) Glenside, PA.

[Steve Galli]

Wow! I knew one member who had an old Shovel worked on at that shop.

Check with Bikeworks (215-885-3633) Glenside, PA.

Thanks you !!!

[Steve Galli]

Try Bill’s custom cycles in Bloomsburg, Pa

Will do... Thank you!!

[Rollo]

Try Joel at Rydacycle near Bloomsburg 570-854-2307. He used to work for Paul at ACF but went out on his own a while back.

Tom (Rollo) Hardy
AMCA #12766

[Steve Galli]

Try Joel at Rydacycle near Bloomsburg 570-854-2307. He used to work for Paul at ACF but went out on his own a while back.

Tom (Rollo) Hardy
AMCA #12766

Thank you! Will look them up...