Announcement

Collapse

AMCA Community Forum To Receive Upgrade

Attempts to upgrade the forum were unsuccessful and will be performed at a later date. We are sorry for any inconvenience this will cause members. Thank you for your understanding.
See more
See less

Upper Valve Spring Collar question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upper Valve Spring Collar question


    Am I correct where the one on the left is 18221-36 (used on EL, FL & FLH from '36-'80) that has an overall height of approx. .390 and the one on the right is 18219-81(used on '81 & newer shovels) that has an overall height of approx.
    .330?
    I am asking assuming the collars are being used in a stock cam lift setup and disregarding the years of the 'rotating cap'. Thanks in advance. Bob#6738


    While we are at it, of the two lower collars I show, what years was the one on the left used and what years for the one on the right(blurry pic-but has smooth bottom). They both have .580 inner holes. Or is the right one aftermarket? Thanks.
    Last edited by BigLakeBob; 12-29-2013, 12:50 PM. Reason: added lower ?
    Bob Rice #6738

  • #2
    In case anyone is interested -81 # upper collar is .330. Thanks Dave for taking your time to open a NOS package and answer this. Bob Rice
    Bob Rice #6738

    Comment

    Working...
    X