1965 Pan speedometer overhaul advice

[electraglide65]

Yesterday, while riding around doing pretty much nothing, I noted a loud, intermittent screaming sound coming from forward of the engine. At first, I thought it might be generator bearings, but I noticed speedometer fluctuating when noise was worst. Needle then popped off of center arbor, and is floating around in speedo. I will be replacing drive, cable, and would like to overhaul speedo at same time. It appears that the bezel ring is crimped to a flange on the speedo case. I have never tried to dissassemble/reassemble this type of instrument in the past, so I have no idea how to proceed. Maybe I am going into too much detail, but this original dial differs from what I have seen in reproduction speedos.The Harley davidson logo is not the bar and shield, but a block cursive underlined, hyphenated style. Anyway all help appreciated

[portagepan]

John Bordas rebuilt a few for me. I don't think very many individuals could do this themselves. Mike

[electraglide65]

Hi, Is John Boordas in the US? Does he have website or shop? Thanks

[Rooster]

John Bordas is in Wheat Ridge, CO.
Phone: 303 420 4510

You won't be dissappointed..!

[36 knuck man]

Two words, John Bordas, he is the best