Knuckle Guru's What do i have?? Picture Heavy

[51FL]

What year is the frame
and are these oem tanks?

[51FL]

More Pics and more to follow

[51FL]

More Pics even more to come

[51FL]

Even More pics please let me know what you guys think

[51FL]

Finally all uploaded , Thanks in advance

[Rubone]

The frame looks like a '41-"43 brazed frame that someone started to rake and either changed their mind or deraked. It has a replaced lower neck support strut and web filled in. rest of the frame looks pretty good. bummer about the neck! Cups are for Hydra-Glide forks.
The tanks appear as '41-'46 but are missing the front trim mounts, likely removed to repair crash damage. The rear half are still there! The emblems are repop.

[Chris Haynes]

What year is the frame
and are these oem tanks?

Frame appears to be 1941-1944. Need to see more of tanks.

[Chris Haynes]

Even More pics please let me know what you guys think

Tanks appear to be original with 1940 trim.

[51FL]

Chris would you say the frame has been modfied? And what pics do you need to see of the tanks

[Chris Haynes]

I already gave my opinion on the tanks. I can see where the lower reinforcement on the neck has been replaced. Something was done there for sure. You would need to clean the neck to bare metal to see what. Then measure to see if it is stock rake or not.

[51FL]

Lower Reinforcement ? Im not sure what you guys are referenceing can you please point it out to me ? As i am fairly new to this Knucklehead game , what is the approx value of this frame , do you think i could trade it for a nice 47 One?

[Chris Haynes]

Lower Reinforcement ? Im not sure what you guys are referenceing can you please point it out to me ?

Look here where the bottom reinforcement reaches the down tubes. All of this is a solid cast part on an unmolested neck. On your neck you can see this piece has been welded in and does not even touch the down-tube area. You can see a space that you could possibly slide a piece of paper into.