I found this photo in the Motorcycle Jackets book. An excellent book by the way. It shows Tom Sifton on his Knuck Bobber with a 1936 California plate clearly visable. The bike has some 1936 faetures on it. Most obvious is the position of the feed line on the oil tank. But is clearly in the 1937 frame. Being as the bike has been repainted it is hard to tell what year it is. A late '36 with the new frame? An early 1937 with a carryover '36 oil tank? A new 1937 sold in late 1936 would have the 1936 plate on it. Does anybody know for sure what year this bike was?
Announcement
Collapse
No announcement yet.
Tom Siftons Knuck Bobber in 1936
Collapse
X
-
Tom Siftons Knuck Bobber in 1936
Last edited by Chris Haynes; 08-08-2009, 12:55 PM.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Tags: None
-
Originally posted by Rub View PostLook again Tom, the hem is at the top of the fold, not at the bottom of the leg.
Robbie
And the Knuckle is cool with or without pants!Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/
Comment
-
Tom Sifton?
Originally posted by Chris Haynes View PostI found this photo in the Motorcycle Jackets book. An excellent book by the way. It shows Tom Sifton on his Knuck Bobber with a 1936 California plate clearly visable.
Doug.Doug McLaughlin #6607
NorCal, USA
Comment
-
That looks like a chrome tank too, which is not on the factory options list, until you see that picture in the September 1936 Enthusiast of Miss Florence Burnham 'well known in the speedboat world' on her fully chromed knucklehead, including tanks and fenders. Lucky these bikes don't come in for judging...
Comment
-
Originally posted by flat-happy View Postthe license plate alone doesn't necessarily date the picture to 1936. it could have been last licensed in 36 then ridden on the track for years after that but the plate remained.Eric Smith
AMCA #886
Comment
-
Hi.
There was a 1937 EL in the judging hall at Davenport this year that had this same style oil tank.
It had the correct pressed top for 37 but had the earlier style rear oil line outlet instead of the better known bottom outlet.
It was a low VIN number, but not what I would call a transition bike "I think the VIN was 37 EL195?"
I have some nice clear pictures but they excede the forum limit and I'm not sure how to resize them for the format but not alter my originals.
Gerry, you once offered to resize some pics for the forum for me.
If I send them to you, can you resize them and post them?
Regards Steve LittleSteve Little
Upper Yarra Valley. Victoria.
Australia.
AMCA member 1950
Comment
Comment