IMG_1660.jpg Need to know finish of Rocker Arms thanks ulf
-
-
I need to know what i can do today a lot is not mor leagel to do Paint Silver or cadmium ??? thanks -
Early were nickle wash later copper plated.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
Okay i think i understand cooper plated no Problem i jave a late 36 thanks and Happy X MAS for allComment
-
Note that the wear surfaces were not plated.Originally posted by ulfhd View PostBe sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
Folks,Originally posted by Chris Haynes View Post
It ain't electroplate.
The parts were dipped in molten copper as part of the hardening process, and then the 'wear surfaces' were machined.
Like WLA crankpins, etc.
....CottenAMCA #776
Dumpster Diver's Motto: Seek,... and Ye Shall Find!Comment
-
I have lots of early open rocker arms that are cad plated and some that are like dull nickle and later ones for enclosed covers are copper plated if that helps you with the finish on them.There is a difference between early and later rocker arms.Comment
-
Its for my 36 E with late nummber thanksComment
Comment