Tweet
Hy,i am nearly Finished with my Engine know the question the Rocker Arms Nickeld or Paint what is corect thanks Ulf 36 Open Rocker
-
-
I've owned four knuckles, looks like copper plate.
KnuckleRockerArm.jpg -
The copper "dip" was part of the hardening process,...
Or so I was told, Folks!
I always wanted exposed rockers.
....CottenAMCA #776
Dumpster Diver's Motto: Seek,... and Ye Shall Find!Comment
-
First design were nickle wash. Second design were copper plated.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
T'aint electroplate copper, Chris!Originally posted by Chris Haynes View Post
That risks hydrogen embrittlement.
Certainly you have seen crankpins with the copper, as well as pushrod adjustors, Pan rockerarms, and the like.
I was told the parts were literally submerged in molten copper during the heat-treat, and then machined afterward.
Certainly not a cheap process!
Ulf needs the nickel that nobody wants to produce correctly, even the platers with antique motorcycles themselves.
....CottenLast edited by T. Cotten; 11-17-2018, 09:32 AM.AMCA #776
Dumpster Diver's Motto: Seek,... and Ye Shall Find!Comment
Comment