Wanted: Two 1934-38 tail lamp connector PN# 5061-34

[Matt McManus]

I am trying to finish up mine and my dads 36EL cannonball bikes and just realized yesterday they neither one of us had a tail light connector. It is the small bake lite piece that plugs into the back side of the tail lamp and has the screw on cap to secure it in place. It has 2 small screws that hold the tail lamp wire in place and 2 spring loaded contact points that he tail lamp bulb contacts.

This is a picture of what I am looking for. I need 2 if possible, I have called Replicant Metals, Harbor Vintage, Bills custom cycle, Old Dude and looked on the internet with no luck. Any help would be greatly appreciated. I am getting very close to finishing the bikes and I need this before I can ride them.

Matt


http://www.motorcycleharness.com/sto...&productId=752

[Chris Haynes]

V-Twin has them. It is the same part used on Model T Ford lamps so check dealers of repop parts for them.

[Chris Haynes]

Snyder's has the single and dual filiment sockets. http://www.snydersantiqueauto.com/1223