eBay seller AMCA member

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Steve Little
    replied
    Hi Larry. The older I get, the slower the gears take to mesh.
    Thanks for the info. I contacted Walt at the time of the auction and he was straight with me.
    Eventually a original set with numbers will come to me and I will use them for measurements for a pattern.
    Regards Steve

    Leave a comment:


  • 36 knuck man
    replied
    Steve, I know this is a late reply, but I finally figured it out. I sold Walt a set of loops like that a long time ago , I dont know if this is that set but they were made by Jim McLean from London, ont, thanks, Larry

    Leave a comment:


  • Matthew N. Olse
    replied
    I made a ton of progress on an all black 47 today, but I left my camera at my apartment. I will take some pics of it at the end of the d...


    i made some up a couple years ago

    Leave a comment:


  • MMasa
    replied
    36 loops? I can make them. I make the others already. Got a sample or a measured drawing? Do they have an integral saddle where they mount to the front down tubes?
    Mark Masa

    Leave a comment:


  • Steve Little
    replied
    Thanks to all for the information.
    I will contact Walt
    Regards Steve

    Leave a comment:


  • kval
    replied
    Originally posted by Steve Little View Post
    Does anyone know if a eBay seller Supercycles 1 from Staton Island is a AMCA member
    Steve
    that is Walt Curro, just contact him with any questions.

    Leave a comment:


  • rwm
    replied
    i can't come up with the owners name. but he is a large guy, also i think he is a officer in the club.

    Leave a comment:


  • Lonnie
    replied
    Steve, you have a PM. By the way, when are you going to reproduce the '36 loops?

    Leave a comment:


  • Steve Little
    replied
    Hi Bob.
    Yer on to me.
    I'm a little skitish about them. They must have been bead blasted at some time in the past.
    They may be original but have the smooth look of a Lost Wax casting.
    I may be wrong.

    Has V-Twin ever sold these?

    If I had know that you live in New York I would have tried to look you up. A freind and I flew to NY straight after the Davenport swap and I rekon we stayed pretty close to your nieghbourhood.
    Regards Steve

    Leave a comment:


  • Robert Luland
    replied
    Looking at those side car loops are ya. I live four miles away from them Steve but can't tell ya who owns the joint. Bob L

    Leave a comment:


  • Steve Little
    started a topic eBay seller AMCA member

    eBay seller AMCA member

    Does anyone know if a eBay seller Supercycles 1 from Staton Island is a AMCA member
Working...