Tweet
I am looking for a double check of how to wire a 27 JD with a generator converted to 2 brush operation, V-Tronic Relay and Ed’s QuickStart electronic ignition. As for generator, red/black wire to #1 on regulator and black wire to #2. From #3 on Regulator (Batt) red wire to battery, then from battery to #7 on ignition panel. As for the red and black wires from QuickStart, is it red wire to IGN and black wire to DIST on coil (using Replicant Metals coil)? I presume the rest of the wiring is per 27 wiring diagram, correct? Many thanks. Bob
NOTICE: New member email requirements now in effect. Longtime member having trouble logging in? Please review the requirements here.
Only registered users may post new messages on this forum. You must be an AMCA member to register. Click the register link on the top right to proceed.
If this is your first visit, be sure to check out the FAQ by clicking the link above. To start viewing messages, select the forum that you want to visit from the selection below.
If you are NOT an AMCA Member and would like to join Click Here