Tool roll wrenches for JD 1927

[Steve Swan]

i am replicating a tool roll tool kit for my 27. i have all the tools except for 3 wrenches. i am able to have the wrenches reproduced, but at best i need samples or at the least i need a tracing of the wrenches so i have some dimensions to work off of.

these are the 2 wrenches i would really appreciate exact tracings:

11803-25 trans clamp nuts/trans filler plug, 5/8"x 1"
11802-X rear/front axle nuts, 7/8"x11/16"

i am hoping someone can help me with an exact tracing for the correct dimensions.

the 3rd wrench, i am resigned to the idea it may be a long time before find the wrench, it is the circuit breaker adjusting wrench with thickness gauge for points gap riveted on end of wrench, pn 1531-15

[MMasa]

Steve
I think that Chris Vacaro may have all of those tools reproduced. He is cmsmcparts on eBay.
Mark

[Steve Swan]

Hi Mark, THANK YOU for your reply, i was afraid i might get no response.

Chris does not have these two particular wrenches, but told me if i can get samples, he can reproduce them.

i wrote Chris back last night, asking if an exact tracing with overall dimensions would suffice in place of requiring a rare example to reproduce the wrenches.

i can understand anyone's reluctance to loan out an original sample. but i am hoping someone could take the time to make a tracing with overall dimensions.

i took the part numbers i posted from the 1927 H-D Accessories Catalog, then measured across the hexes to come up with the jaw dimensions.

[Steve Swan]

kicking the ball to the top.....

[Tommo]

I can help with genuine HD ones.
Send me a pm

[Steve Swan]

Thanks Tommo, i sent you a pm.

[Tommo]

Steve,
I take it these are the two spanners you are talking about.
The other photo show the Ignition spanners that I have that are for the various systems found on teens and twentys Harleys.

[Tommo]

I know this is a bit off topic but while I had the box of tools out for Steve I thought some of these other Genuine HD tools may be of interest.
As you can see I have several of CK 56, the Inlet housing retaining nut wrench and am willing to sell.
Interested parties please pm me.

[Steve Swan]

Tommo, i sent you a pm on the pliers.