Antique Light........

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rooster
    Senior Member
    • Mar 2009
    • 543

    #1

    Antique Light........

    Flat-happy asked me to post these photos for him, he's having some problems with that, so I don't mind helping out.

    I will let him explain...............
    Attached Files
  • flat-happy
    Senior Member
    • May 2009
    • 543

    #2
    thank you rooster---can anyone tell me what this is? it is 6 volt and very bright. i took it off the cross bar of and old henderson sidecar in lubec maine about 40 years ago. chris tells me it is not specifically for a motorcycle and it probably is not. the entire light is brass except for the steel mounting bracket. it measures about 6 1/2 by 10 inches. since it was found so close to canada it could be british made. i know they made a motorcycle called THE BROWN back at the beginning of the century. the side car was once owned by ronald haughn in st andrews nb canada. it was down in the bottom of an old lighthouse and is probably still there. the hole was only 16 inches square to get in there and i wouldn't fit now----thanks again for the help tom

    Comment

    • Chris Haynes
      Curmudgeon
      • Jul 2002
      • 5939

      #3
      Both Harley-Davidson and Indian used headlamps made by a Brown company.
      Be sure to visit;
      http://www.vintageamericanmotorcycles.com/main.php
      Be sure to register at the site so you can see large images.
      Also be sure to visit http://www.caimag.com/forum/

      Comment

      • flat-happy
        Senior Member
        • May 2009
        • 543

        #4
        what years chris? any chance you have any pics? thank you

        Comment

        • Chris Haynes
          Curmudgeon
          • Jul 2002
          • 5939

          #5
          '20's/early '30's.
          Be sure to visit;
          http://www.vintageamericanmotorcycles.com/main.php
          Be sure to register at the site so you can see large images.
          Also be sure to visit http://www.caimag.com/forum/

          Comment

          Working...