Sport twin clutch help

[MartinK]

I need to ask for some help with the clutch actuator because I can't understand how it goes together.
The clutch assembly I have under control, but not the clutch actuating cam on the opposite side.

Am I missing a cam on the part #167 " Clutch actuating cam"?
I have all the parts as in the parts book: 167 to 173. The cam on left in the picture is number 172 which is placed in the cover.

The parts book doesn't specify any cam on the #167 but what should mate to the #172 cam?
To get the rotating movement to an axial one I, there must be a cam on #167.
bild-4.jpg


I also don't understand the difference of nut 199+200 versus 250+251 (they have the same part numbers).
nut 199+lock washer 200 locks the clutch to the mainshaft. But where does 250+251 go? it is like they specified these twice.
bild5.jpg

Thanks
Martin

[MartinK]

Here is a shot of the relevant page in the spare parts book.
bild-5.jpg

[Venus]

Hi Martin,

It has been a while since the last time I have looked on the forum.
I have made pictures of every step of building back the engine and also the clutch.
I can shear with email if you like.
Contact me

Peter