Announcement

Collapse
No announcement yet.

1925 jd tires

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1925 jd tires

    was hoping someone might know the correct tire size for a 1925 jd ...thanks chris

  • #2
    I believe they are 3.85 x 27 clinchers that were used on the J models, from the time they got the "streamlined" look, the lowered frame, in 1925. I know that is the size on my friend's bone-stock 27JD, and that Coker makes them.
    If you have to go to drop-center rims, or if someone already has put 19 inch drop-center rims on your JD back, during the period that clincher tires were unobtainable, a 4.00X19 looks good on them. A Dunlop K-70 even has a "period" tread-look.
    Last edited by Sargehere; 04-01-2010, 10:03 PM.
    Gerry Lyons #607
    http://www.37ul.com/
    http://flatheadownersgroup.com/

    Comment


    • #3
      right now it has clincher 18x3.75...they look too small and i have had points deducted for them......just bought the correct front rim and hub..still looking for rear..(this is an unrestored original )....was the 18" clincher an option? thanks for your imput

      Comment


      • #4
        Clincher tires were stock on all J models. Clinchers were not measured by the rim size, but by the O.D. of the tire, and that's what it says on the tire wall, "3.85 x 27" is what you want to see.
        Drop-center rims were not stock on most Harleys until the VL/RL era, circa 1930. I think 3.85 x 27 means a 19 inch rim. 27 - (2 x 3.85) = 19. ("A" and "B" singles were an exception, using clincher tires well into the 1930s)
        I know that "2.50 x 24" clincher tires will "stretch over," and were used in a pinch, in the old days, when 3.85 x27 tires weren't available. But they look ridiculously skinny on a JD. But five inches from 24 also equals 19 inches.
        Last edited by Sargehere; 04-01-2010, 09:39 PM.
        Gerry Lyons #607
        http://www.37ul.com/
        http://flatheadownersgroup.com/

        Comment


        • #5
          Mebbe I'm losin' it. Coker makes an assortment of 28 x 3s, like this one:
          http://store.cokertire.com/popular-t...all-black.html
          And this 28 x3.50 one:
          http://store.cokertire.com/350-20-si...wall-tire.html
          So if Coker ever offered the 3.85x27 tire, they don't any more.

          And page 57 of Jerry Hatfield's Inside Harley-Davidson states "The wider 1925 frame allowed wider 27x3 1/2in. tires in place of the former 28x3in. tires... based on the outside diameter of the tires; wheel sizes from rim to tim were 22 in. through 1924, and 20 in. from 1925."
          Last edited by Sargehere; 04-01-2010, 10:06 PM.
          Gerry Lyons #607
          http://www.37ul.com/
          http://flatheadownersgroup.com/

          Comment

          Working...
          X