Tweet
Who repairs intake nipple threads on flathead cylinders?
Dan
Dan
-
-
Dan!
Since no one is willing to assist, you are probably considering the operation yourself.
There are some observations you may find useful at http://virtualindian.org/11techleaktest.html
The cam-shaped riveting anvil is best held in a vise; The wrench is only for in-chassis attempts.
Good luck, as it can be very frustrating.
....Cotten -
I guess I wasn't specific enough in my post. My apologies. It's a 40 WLD rear cylinder. It appears the previous owner just removed the rivet and wrenched out the old nipple which bunged the threads in the cylinder itself. Now a new nipple is a loose fit. Does anyone make an oversize nipple or can the threads be repaired to accept the stock nipple?
DanComment
-
Dan!
The model doesn't matter, they are removed and installed the same.
Anyone with a lathe can make an oversized nipple...
There are two very experienced individuals who monitor this forum that I would endorse, but like all who excel in their field, they are probably booked solid with established accounts..
...CottenComment
Comment