flathead carberator m741-1

[militaryrider]

I picked up a m741-1 linkard [3 hole], I cannot find my bible to tell what it is off of . any help ?
this carb is about 1/3 shorter than a m88 .
I am building a 45'' bobber and thought it might be a good carb
for this project . should I run this carb or stick with a m88?

[c.o.]

You've got yourself a little military Indian carb......Cotten could probably answer your application question........but I'm guessing stick with the M88......

[indianut]

NO You should NOT run this carb on your 45.

[militaryrider]

gentlemen , thank you for You input !
Yes I have to contact Cotten for parts to rebuild a m88 !
also one of His floats .
I thought that carb would work on a 45 motor , No big loss , off to ebay it will go ! I can strip everything off of it I need for my m88 !