fuel petcocks needed

[ldfly112]

Does anyone know of a source for petcocks for early 1937 UL or Knuckle that wont leak or a solution to making them not leak Thanks if you can help

[exeric]

I've been very impressed with this stuff.

EZ Turn Lubricant | Pilotshop

[Highlander]

I agree, I use EZ Turn on the petcocks when they are difficult to turn, and it helps prevent them from weeping fuel. Good stuff.

[HDSmitty]

After seeing recommendations on the above many times on this forum I also ordered some and have been more than happy with the results. Get it! .....Hope this helps......Smitty

[Steve Slocombe]

Colony and I used to make 3601-16 gas valves but stopped because of returns. That wet gas is really vicious with a steel plug in a brass body. I've recently been getting these gas valves from Jarek Nowicki in Poland and they have been good so far. He usually has them on eBay.

[ldfly112]

Steve do you have any contact information for Jarek Nowicki I would like to try his petcocks Thanks if you can help

[Steve Swan]

Colony and I used to make 3601-16 gas valves but stopped because of returns. That wet gas is really vicious with a steel plug in a brass body. I've recently been getting these gas valves from Jarek Nowicki in Poland and they have been good so far. He usually has them on eBay.

Hi Steve,

What is Jarek's ebay seller name?

[jorrow]

http://cwsmoto.com Buy direct from him. This is Jarek's website. I got prompt response, and fast delivery.

[Steve Swan]

http://cwsmoto.com Buy direct from him. This is Jarek's website. I got prompt response, and fast delivery.

Thank you!

[otis71]

I used reproduction Indian petcocks I bought from Jerry Greer. Everything fit the same but the appearance does differ. They were 1/4 the cost of reproduction Harley ones and have worked just fine.

[ldfly112]

Thanks how do i find Jerry Greer email website thanks if you can help

[Jim]

Thanks how do i find Jerry Greer email website thanks if you can help

Here ya go!

https://www.jerrygreersengineering.com/