1932 Jiffy stand spring help

[sny]

Hello,
For my 1932V jiffy stand I need help finding the right spring and how it mounts. I've found conflicting info in my searches. See the photos below. Is where I marked in red how it mounts? Anyone know the part number?

IMG_2479-4.jpg

IMG_2483.jpg

IMG_2484.jpg

[Steve Slocombe]

13202-30, about $10, and I mount mine with the hooks the other way round. There is discussion about this elsewhere on the forum.

[sny]

13202-30, about $10, and I mount mine with the hooks the other way round. There is discussion about this elsewhere on the forum.

Thanks and of course now I see the other thread. I was spelling jijjy wrong lol.

http://www.antiquemotorcycle.org/bbo...ht=Jiffy+stand

[1970 XLCH]

The riders handbook showes the hooks down . I got dinged the first time judging for that , but not the next two times .

[sny]

I got my spring in the mail today. Have any tricks to install it?

[sny]

Here's how I did it for the archives
1. Removed the tab
2. hooked the spring up to both sides
3. put tab back on
4. slowly tightened nut a little bit at a time, making sure to not let the spring get too crooked, while trying to rotate tab back into correct place

IMG_2565.jpg