Announcement

Collapse
No announcement yet.

Need a tracing for VL components.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need a tracing for VL components.

    I need a tracing of the rear fender brace bracket to make one, it's the bracket that bolts to the rear frame with the two rivets on both sides of the hole also if possible I need a outside tracing of the hinge, either side will work. If someone would do that for me I will send a self addressed envelope so I could get it. If someone that lives within 50 miles or so of the Chambersburg Pa area and wouldn't mind and has a VL I would like to look at their bike, take pictures and make the tracing. Thank you in advance, Ed
    Attached Files

  • #2
    I still need a tracing of this bracket if anyone could get me one, thanks.

    Comment


    • #3
      Maybe you could just buy one from Replicant metals?
      http://www.replicantmetals.com/products-rl.html
      Be sure to visit;
      http://www.vintageamericanmotorcycles.com/main.php
      Be sure to register at the site so you can see large images.
      Also be sure to visit http://www.caimag.com/forum/

      Comment


      • #4
        I have one. its off right at the moment, but I wouldn't know how you would like it to be traced,
        I am on Maryland's Eastern Shore, you are welcome to come here and trace your heart out,,,
        PM me if you think I can help
        Steve

        Comment


        • #5
          f.jpg

          Steve, Attached (I hope) is a picture of the bracket I need traced, if you can do it and PM me with your address I will send you a self addressed envelope, Thanks. Ed

          Comment

          Working...
          X