Announcement

Collapse

AMCA Community Forum To Receive Upgrade

Please be aware that Saturday July 5, 2025, the AMCA will be completing an upgrade to the AMCA Community Forum. This upgrade will at times make the Community Forum unavailable. We are sorry for any inconvenience this will cause members. Thank you for your patience.
See more
See less

Zerk/Greae Fitting on VL Steering Head

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Zerk/Greae Fitting on VL Steering Head

    I am about ready to assemble my I-beam front end on a '31 VL frame and before I got to far; I wanted ask if anyone installed a grease fitting on the steering head? There is clearance between the stem and cups to allow future greasing of the bearings. If so, where was it installed? And maybe there is no need for one??

    Thanks,
    William
    Last edited by wideglide38; 04-20-2016, 11:01 AM.
    William Edwards, AMCA #10035

    Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
    http://www.amcasouthernnationalmeet.com/
    Tags: None
  • #2
    If it is a nice original unaltered frame, then leave it that way. You will never be able to kick yourself in the ass enough for molesting it.
    Ride 'em. Don't hide 'em.
    Dan #6938 FUBO

    Comment

    • #3
      Dan, You are right about the kickin'. I assembled the forks to frame with no zerk.
      William Edwards, AMCA #10035

      Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
      http://www.amcasouthernnationalmeet.com/

      Comment

      Previous template Next
      Working...
      X