1936 vld
Collapse
X
-
Thanks, Jim. That absolutely makes sense and clears up the mystery holes on the cam cover. Can't wait to find all the parts I need and get this project together. Thanks!
-
The oil doesn't come out of the crankcase... but a tube that runs from the right side. OK.... let me say it this way. The tube comes out of the bottom of the right side timing case and then makes a 90 degree turn and goes over to the left side sort of under the engine mount bolts. Then it pops through the inner primary chain cover, and ends just under the rear footboard mounting stud. It comes through a hold and will "breath" a mist of oil on your chain. This was all well and good during those dirt road days, but it really isn't needed anymore. On the '36 oil pump there is a screw that adjusts the amount of oil that goes to the chain. This is done by removing the thin washers from under the screw head. By removing the washers, you will slow down the oil that goes to the chain. I have removed all but one of the very thin washers.Originally posted by skidshoe View PostThanks again everyone for the input. Jim, the "chain oiler" is really the only thing mechanically that has me stumped. All of our W models have the crankcase vent/chain oiler on the left side case and almost directly out from the rear engine mounts. Steve's book describes the path of the oil very well, but I'm not seeing where exactly the oiler/vent pipe spits out of the left case. Am I reading something wrong here?
Mike
Hope that helps
Leave a comment:
-
Thanks again everyone for the input. Jim, the "chain oiler" is really the only thing mechanically that has me stumped. All of our W models have the crankcase vent/chain oiler on the left side case and almost directly out from the rear engine mounts. Steve's book describes the path of the oil very well, but I'm not seeing where exactly the oiler/vent pipe spits out of the left case. Am I reading something wrong here?
Mike
Leave a comment:
-
Here's one on ebay, the only difference between it and mine is that mine says "74 and 80 Twin Models." Same items, diagrams, etc. on the same pages and the price ain't bad.
Rich
http://www.ebay.com/itm/VINTAGE-HARL...-/301088542673
Leave a comment:
-
Mike,
I too love my VL's but they are different to ride from other later hand shift bikes. It may be a bit hard to get it into gear initially but just take it easy and it will go. Once you have gottenit in the first tiem it usually goes okay after that. Also since it is a slding gear tranny it can be a little more difficult to get nice smooth shifts. It is just a learning curve you are going to have to adjust to but once you have it down they are a lot of fun and with the narrower wheels and tires they are nimble and handle surprisingly well. They are not really geard for the highway, since there wern't really any, but Steve has sprockets available incase that is where you want to go. I find them best on back roads at speeds up to around 50 or so. They have great torque so they pull well. Enjoy!!!!
Tom (Rollo) Hardy
AMCA# 12766
Leave a comment:
-
As Jim said don't worry about the oil dripping. Just remember that when you take your new bike to show it off at a friends house, don't park on his driveway!
Leave a comment:
-
Cory, I didn't download that manual, but that says it is for the 45" twin.Originally posted by c.o. View PostThe 1935 version is here... http://antiquemotorcycle.org/virtual...roducts_id=156
Leave a comment:
-
Since the total loss oil system is new to you.... don't worry about that little trail of oil that spills out of your primary cover when you take off. This happens to me when I leave the bike sit for long periods of time. So, what I do is, after I start it to help keep the oil off the driveway, I may ride out to the street by riding it over the grass if the bike has sat. If I rode it within a few days, then I just go out the driveway and there isn't any trail of oil. I have a BIG yard, so it isn't a problem. The oil ends up in the primary due to the "Chain Oiler". Do some searching on the forums and you'll see info about this. I just had my 32e generator rebuilt and even though I too don't really ride it at night, I like to have that option of maybe turning on the headlight during the day when riding in a 'busy' area.
Just have fun with it! I LOVE my VL's.
Leave a comment:
-
Thank you all for your input. I doubt I will be riding at night a whole lot, so the 6 volt system shouldn't be a problem. Although similar to the 45" W's, the VL and total loss oil system is all new to me, so I'm sure I will have to bother you all with more questions down the road. All of you AMCA members and this forum provide such a valuable resource for younger people like myself.
Mike
Leave a comment:
-
The 1935 version is here... http://antiquemotorcycle.org/virtual...roducts_id=156Originally posted by don View PostI figured it out, just can't find the VL riders handbook.
Leave a comment:
-
I too, say the more information the better. It is small enough that if you wanted to it could go in the tool box for any on the road issues/questions. For that I would opt for a less expensive reprint.
I also have no issues running 6 volt stuff as my 3 VL's and other numerous knuckles, flatheads and pans are all still 6 volt. Just don't over drive your lights is all. How much night time running are you planning on doing?? Stock configurations work for me and I'm not having to try to remember how the bike I'm currently on is set up. JMHO.
Tom (Rollo) Hardy
AMCA #12766
Leave a comment:
Leave a comment: