Announcement

Collapse
No announcement yet.

Primer plug

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Primer plug

    Guys, a while back I posted about when they stopped putting in the hole for primers on UL heads. The new question is? Does anyone have the part number for the plug they used in place of the primer. I have searched my books to no avail. Even if ya got one laying on the shelf that you good give me the measurements. Thanks, Bob L
    Last edited by Robert Luland; 03-09-2013, 02:46 PM.
    AMCA #3149
    http://www.thegoodoldmotorcyclepartscompany.com

  • #2
    Bob,
    If you find it, i would be interested in 2 as well.
    Len.
    p.s. I'll ask around and see if i can come up with it as well.
    AMCA #765

    Comment


    • #3
      I don't think there's a part number. It is a 1/8 NPT plug, the 27 tpi thread that is the same as the tank side of the Harley gas taps, and about 3/8" long with a screwdriver slot in the top.

      Comment

      Working...
      X