Stock Harley SCREW JACK

[Sidehacker]

Rub , got it thanks for the explanation.And the illustration and part number.

[Rubone]

Do you have the part number for it and any information on the corresponding bracket on the bike.

Sidehacker,
You are still not getting it. there is no "bracket" it fits directly into the Duo-Glide frame. If you frame is later or has been modified it has no where to go!
Robbie

[Sidehacker]

Thanks for the picture. Do you have the part number for it and any information on the corresponding bracket on the bike. Thanks

[panhead_jim]

Thanks for posting that picture. Now I know what to look for. Never would have spotted it otherwise.

[Rubone]

NOS jack. The hole is in a short tube extension on the right side of the frame behind the exhaust at the lower rear forging.
Robbie

[panhead_jim]

I've heard mention of these, but have never seen a picture. Does anyone have a picture of the jack and the tube sticking out of the side of the frame?

[Chris Haynes]

These were stock on some Duo-Glides. You have to have the tube sticking out the side of the frame to use it. I usually simply lay my bike on it side when repairs are needed. Make sure you have the side with your battery vent up.

[Sidehacker]

Ive lost or misplaced an article I had twenty-five years ago about a very small three piece screw jack that was made for your tool bag . It had a flat base witha hole in the middle , the jack body has a tit on the bottom and top, the tit on bottom fit in the hole in the base. The tit on the top fit in a hole on the frame. I think the hole on the frame was in a added bracket that resembled the bracket for the footboard and it was welded underneath the bike around the seat post I think . It's been so long since I've seen it. What I want is part number for jack and part number for weld on bracket. I would also like to know which years the bracket came stock on the frames I thinkit was like a ten year period but I'm not sure. I would like to reperduce these since they made so few. I don't think they worked that great. You were supposed to jack up bike then as quickly as possible put something more stable under bike for support. People were trying to change tires using only jack .....ouch . In the pictures I saw it looked like a good idea when you were alone in the middle of nowhere with no blocks of wood or rocks . Let me know if anyone has this information