Tweet
I can't see how the 3 mag hold down bolts go in when the timing chest is on the crank cases. Am I missing how you get the bolt up in there and a wrench on it?
Dan
Dan
-
Dan Margolien
Yankee Chapter National Meet July 31/August 1 2020 at the TERRYVILLE Fairgounds, Terryville CT.
Www.yankeechapter.org
Pocketvalve@gmail.com -
Dan, have the bolts already dropped thru the magneto and then wiggle it in there and the bolts will drop thru the case. Make sure bolts are not too long.
Comment