Mesinger Seat Bolt

[downunder vl]

Hi all,

I'm looking for the bolts to attach a Mesinger seat to the frame. See the attached photo of the hole where the boly fits.

Any suppllier information appreciated.

Thanks

Mesinger Seat Bolt Hole.jpg

[knucklehead 61]

Januze Panuze in Poland should have them in stock.

[exeric]

That is a unique proprietary bolt, and nut that I have only seen on a Messinger seat. They are 5/16" x 20 tpi (special thread) and have that formed 'dog' pressed into the head to fit the slot in the cantle to bridge mount. I don't think anyone makes that nut & bolt (but see post above so you may be forced to make them. I would make them out of 5/16 x 18 carriage bolt and perhaps braze on a piece of round stock to make the 'dog'. However, it would be cheaper, and easier to buy them from Januze.

messinger bolt.jpg

[duffeycycles]

Janusz Panusz

[pisten-bully]

Jerry Greer's has this:

IMG_4496.jpg



Walker Machine has this (and I have no idea what the dimensions are):

http://walkermachine.com/yokeclipbolt2reqeach.aspx

IMG_4495.jpg