fender struts

[fillibuster]

Couldn't decide which topic to post under.
Indian fender struts are made of a drawn flat strip, 3/4" x 3/16" (rear), and 5/8" x 3/16" (front). Most current steel warehouses supply flats that are sheared, and 5/8" is rare, and these sheared flats require some dressing to round the edges, like you would have on the older drawn strips. .. so where do I find the drawn strips?

[redfred84]

Hey Phil,
Try the strapping used for cyclone fences. I file the edges a little.
RF.

[fillibuster]

Hey Phil,
Try the strapping used for cyclone fences. I file the edges a little.
RF.

found the right stuff, drawn, no galvanizing, no filing the edges. Silly sales guys being idiots.

[redfred84]

Where'd you find it then?
RF.