Pin Striping

[rwrun]

Does anyone know the correct width of the striping on a 35 rld, the stripe between the two colors on the tank and fenders the thin stipe on the tank and the lower strip on the fenders. Any help would be appreciated

Thanks in advance
Rich

[PaintPro]

Pinstripe widths

All factory pinstriping was by hand and as such was subject to some variation
due to brushing tecniques of each individual striper. I have done a number of older bikes over the years and have provided when possible a picture of an original bike to my striper and let him use his judgement. I would say the average width applied back the was 1/8th of an inch.