Tweet
great work. what lead-tin percent are ya using on the tanks?
-
gww57.com -
Nothing like getting a wheel finished, putting on the tire, and then putting it on the chassis. Looking good!Eric Smith
AMCA #886Comment
-
Hi GWW, i used 60/40 and a tinning paste flux and also ruby liquid flux, work well with an iron. i also just used KREEM in the tank to seal them all up. i have used the KREEM on a 45 HD tank 20 years ago and still looks good inside the tank!Comment
-
I need help finding a new front rod, just found a crack in mine! anybody have one to sell?
photo 73.jpgphoto 74.jpgComment
-
you'll probably find one like Al did. fwiw, Al is exploring feasibility of having new rods produced. i am on Al's list. i want a spare set just in case...Steve Swan
27JD 11090 Restored
https://www.youtube.com/watch?v=ClUPIOo7-o8
https://www.youtube.com/watch?v=LtuptEAlU30
27JD 13514 aka "Frank"
https://forum.antiquemotorcycle.org/...n-Project-SWAN
https://www.youtube.com/watch?v=hNRB...nnel=steveswan
https://www.youtube.com/watch?v=RSDeuTqD9Ks
https://www.youtube.com/watch?v=bwlIsZKmsTYComment
-
-
Ok got the lower end back together, i have to make a p/n 528-14 relief stud... anybody got one for sale?photo 75.jpgLast edited by wowswitch; 12-06-2016, 08:30 PM.Comment
-
Sure. I've got one. Looks like you need the socket for it too or is it just not pressed in?
Need the arm that fits on the cam rack?
PM me.
Mark MasaMark Masa
www.linkcycles.comComment
-
Hi Mark, yes i need the socket too and the relief stud, i have a cam rack. how much?Originally posted by MMasa View PostComment
-
Pm me with your email address and we can discuss the details.
I figured that you have a cam rack, but do you have the decompression part that fits ONTO the cam rack?
This is the part that the stud acts upon which in turn lifts the exhaust cam followers and valves relieving the compression.
MarkMark Masa
www.linkcycles.comComment
-
neat build, looks like your doing a great job. Thanks for sharing with the rest of usComment
-
Ok I'm back at it, somehow i missed Marks msg. so i went and made the exhaust lever, seem to work...IMG_5095.jpgIMG_5094.jpgIMG_5098.jpgIMG_5097.jpgComment
-
also i made a fixture to hold the cylinder to bore and hone them 0.040" over, worked great.IMG_5087.jpgIMG_5089.jpgIMG_5101.jpgIMG_5102.jpgComment
-
-
also i ended up making my own relief pipe after the one i bought P/N 543-12 did not fit i needed P/N 543-25IMG_5215.jpgIMG_5216.jpgIMG_5217.jpgComment
Comment