Rivet
Maxglass,
When you drill the countersink leave the shoulder of the rivet above the bore so the tool won't hammer the bracket.
It's not from a catalog but it works with a little pratice and rivets are fairly cheap. I actually hit mine with the driver a little more than it shows in the picture posted because I wanted them a little more rounded. Make sure you use a pilot drill for the ball nose mill or it will walk all over. Size on out side of primary is 1/4 inch and inside is 3/8 inch or that is what I used.
![photo IMG_1160_zps36055768.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1160_zps36055768.jpg)
Worked on the Oil tank and got ready for primer. Replaced the bad bracket, filled rub marks from coil in a past life with weld smoothed all and I think were ready.
![photo IMG_1161_zpsb76da495.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1161_zpsb76da495.jpg)
Some of that Random stuff......
Austins summer project was building a powder coating booth and oven. He honed his layout skills and learned what a "Crows foot" was. 2000 plus pop rivets later I think he gets it. He got to use all that math and geometry he didn't understand why they were teaching him in class. It is actually nice to see the look on his face when something kicks in and he understands why and how he got there himself.
![photo IMG_1053_zps1cf392a0.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1053_zps1cf392a0.jpg)
![photo IMG_1054_zpsf5788321.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1054_zpsf5788321.jpg)
![photo IMG_1056_zps514b06fa.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1056_zps514b06fa.jpg)
Planning a large weekend push to prep for primer Thanksgiving weekend. Austin has promised to do my wheels and hubs so I can finish Primary and Frame.
Enjoy your day and will bore with more later.
Maxglass,
When you drill the countersink leave the shoulder of the rivet above the bore so the tool won't hammer the bracket.
It's not from a catalog but it works with a little pratice and rivets are fairly cheap. I actually hit mine with the driver a little more than it shows in the picture posted because I wanted them a little more rounded. Make sure you use a pilot drill for the ball nose mill or it will walk all over. Size on out side of primary is 1/4 inch and inside is 3/8 inch or that is what I used.
![photo IMG_1160_zps36055768.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1160_zps36055768.jpg)
Worked on the Oil tank and got ready for primer. Replaced the bad bracket, filled rub marks from coil in a past life with weld smoothed all and I think were ready.
![photo IMG_1161_zpsb76da495.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1161_zpsb76da495.jpg)
Some of that Random stuff......
Austins summer project was building a powder coating booth and oven. He honed his layout skills and learned what a "Crows foot" was. 2000 plus pop rivets later I think he gets it. He got to use all that math and geometry he didn't understand why they were teaching him in class. It is actually nice to see the look on his face when something kicks in and he understands why and how he got there himself.
![photo IMG_1053_zps1cf392a0.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1053_zps1cf392a0.jpg)
![photo IMG_1054_zpsf5788321.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1054_zpsf5788321.jpg)
![photo IMG_1056_zps514b06fa.jpg](http://i1093.photobucket.com/albums/i423/itsbobsdream/IMG_1056_zps514b06fa.jpg)
Planning a large weekend push to prep for primer Thanksgiving weekend. Austin has promised to do my wheels and hubs so I can finish Primary and Frame.
Enjoy your day and will bore with more later.
Comment